Product Presentation; General Description - ADEUNIS DRY CONTACTS IP68 Guide Utilisateur

DRY CONTACTS IP68 LoRaWAN 863-870 - Guide utilisateur / User guide version V1.0.0

1. PRODUCT PRESENTATION

IMPORTANT NOTE: The DRY CONTACTS can be started with a magnet or changing the operating mode to PRODUCTION with the IoT Config-
urator.
Description:
• The adeunis® DRY CONTACTS is a ready-to-use radio transmitter enabling the user on one hand to transfer statuses and alarms on a Sigfox
network and on the other to control relays via the same network.
• This product meets the needs of users who require to remotely monitor (or control) simple on-off digital data: detection of door opening,
presence, machine starting, warning, etc.
• The use of the protocol allows you to integrate the DRY CONTACTS into any network that is already deployed.
• Four digital inputs/outputs can be supported by a single DRY CONTACTS transmitter.
• The product emits the data either periodically or in an event-related way on a change of state.
• The configuration of the transmitter is accessible by the user via a micro-USB port, allowing in particular a choice of modes of transmission,
periodicity or type of interface (input/output).
• The DRY CONTACTS is powered by a replaceable internal battery and can be wired with an external supply.
• The device is compatible with the LoRaWAN Class C and can be used in this class if powered by an external supply.
• The device is compliant with the KARE+ service.
IMPORTANT NOTE: The LoRaWAN DRY CONTACTS is delivered by default with OTAA configuration, allowing the user to declare his/her prod-
uct to a LoRaWAN operator.
Composition of the package
The product is supplied in a cardboard box containing the following items:
Top casing, electronic card, casing base plate,
Cable gland, 3 gland seals (5.4 et 4.2 mm)

1.1. General description

Casing base
2 holes for
passing collars
through
4 fastening holes
Rail-DIN un-
locking lever
Casing base detail
Cables outlet
packing gland
41 of 63
FR
EN