Product Presentation; General Description - ADEUNIS Sigfox BREATH PM1 Guide Utilisateur

Sigfox BREATH - Guide utilisateur / User guide version V1.0.0

1. PRODUCT PRESENTATION

Description:
• The Sigfox BREATH from adeunis® is a ready-to-use radio transmitter for measuring particulates matters µ, 2.5µ and 10µ and Total
Volatile Organic Compounds (TVOC).
• This device meets the needs of users to monitor indoor air quality of their building through an LPWAN network.
• The device issues data periodically or when thresholds are high or low.
• The device include a button that enables to start and to detect one or several events (push button) and to send an associated frame.
• The device include also a digital input to connect a sensor to detect related events (ex: doors opening, water-leak...).
• The user can access the transmitter configuration locally via a micro-USB port or remotely via the Sigfox network.
• The Sigfox BREATH is powered by an external supply supplied with the sensor.
• The device is compatible with the adeunis KARE® Device Management platform and the KARE+ service.
To start the Sigfox BREATH, use the button on the side of the case or choose PRODUCTION mode in the IoT Configurator.
Package contents
The device is delivered in a carton package containing the following:
Front panel, rear panel and electronic card, 5V external supply with a wire of 3 meters.
2 x CBLZ 3.5x 19mm screws, 2 x SX5 Fischer plugs
1.1.

General description

LEDs Start-up, calibration and connec-
ted button
Opening casing
2 holes for fixing with screws
micro-USB
Digital input
Page 35 of 52
FR
EN