Product Presentation; General Description - ADEUNIS WMBUS TEMP Guide D'utilisateur

WMBUS TEMP - Guide utilisateur / User guide version V2.0.0

1. PRODUCT PRESENTATION

NOTE IMPORTANTE : The WMBUS TEMP can only be started with a magnet.
Description:
• The adeunis® WMBUS TEMP is a ready-to-use radio device enabling temperatures to be measured and transmitted by wireless communica-
tion network.
• This product meets the needs of users who require to remotely monitor internal and external temperatures of storage rooms, meeting rooms,
cold rooms, etc.
• The use of the WMBUS TEMP protocol allows the user to integrate the WMBUS TEMP into any network that is already deployed.
• The WMBUS TEMP is fitted with internal and external probes.
• The product emits the data from the sensors either periodically or in an event-based way based on top or bottom thresholds.
• The configuration of the transmitter is accessible by the user via a micro-USB port, allowing in particular a choice of modes of transmission,
periodicity or triggering thresholds.
• The WMBUS TEMP is powered by a replaceable internal battery.
Composition of the package
The product is supplied in a cardboard box containing the following items:
top casing, electronic card, casing base plate
cable gland, 3 gland seals, 2 CBLZ 2.2 x 19mm screws, 2 Fischer SX4 plugs

1.1. General description

Casing base
49,50
Antenna
2 holes for passing
collars through
4 fastening holes
Rail-DIN unlocking
lever
Casing base detail
Cables outlet
packing gland
FR
EN
45 of 77