Product Presentation; General Description - ADEUNIS ARF8201CA Guide Utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

WMBUS ANALOG PWR - Guide utilisateur / User guide version V2.0.0

1. PRODUCT PRESENTATION

IMPORTANT NOTE: The WMBUS ANALOG PWR can only be started with a magnet.
Description:
The ADEUNIS RF WMBUS ANALOG PWR is a ready-to-use radio transmitter enabling any type of 0-10V or 4-20mA sensor to be converted
into a wireless communicating sensor.
FR
This product meets the needs of users who need to remotely monitor data of any kind (temperature, pressure, level, humidity, CO², speed,
brightness, opening, etc.)
The use of the WMBUS protocol allows you to integrate the WMBUS ANALOG PWR into any network that is already deployed.
Two sensors can be supported by a single WMBUS ANALOG PWR transmitter.
The product transmits the data from the sensors either periodically or in an event-related way based on top or bottom thresholds or on
detection of a change of state on its digital inputs.
EN
The configuration of the transmitter is accessible by the user via a micro-USB port, allowing in particular a choice of modes of transmis-
sion, periodicity or type of interface (0-10V or 4-20mA).
The WMBUS ANALOG PWR is powered by an external power supply.
IMPORTANT NOTE : The WMBUS ANALOG PWR can transmit measurements from the sensors but does not feed them (except the digital
version).
Composition of the package
The product is supplied in a cardboard box containing the following items:
top casing, electronic card, casing base plate,
cable gland, 3 gland seals, 2 CBLZ 2.2 x 19mm screws, 2 Fischer SX4 plugs

1.1. General description

Casing base
49,50
Antenna
2 holes for passing
collars through
4 fastening holes
Rail-DIN unlocking
lever
Casing base detail
Cables outlet
packing gland
Page
48
of 83

Publicité

Table des Matières
loading

Table des Matières