sigfox MODBUS MASTER - Guide utilisateur / User guide version V1.0.0
1. PRODUCT PRESENTATION
IMPORTANT NOTE: The sigfox MODBUS MASTER can only be started with a magnet.
Description:
•
The adeunis® sigfox MODBUS MASTER is a ready-to-use radio transmitter with a MODBUS interface
•
This product meets the needs of users to communicate with one or several MODBUS slaves and transmit thier information via a sigfox
network.
•
The product could handle upto 5 slaves with 10 registers by slave (only 5 registers could be periodically send).
•
The product transmits the data from the slaves either periodically or in an event-related way based on high or low thresholds.
•
The configuration of the transmitter is accessible by the user via a micro-USB port or remotely via the sigfox network, allowing in particular
a choice of modes of transmission, periodicity or triggering thresholds.
•
The sigfox MODBUS MASTER is powered by an external power supply (not included).
•
The product is able to provide and control the power supply for a slave.
Composition of the package
The product is supplied in a cardboard box containing the following items:
top casing, electronic card, casing base plate,
Cable gland, 3 gland seals, 2 CBLZ 2.2 x 19mm screws, 2 Fischer SX4 plugs
1.1. General description
Casing base
49,50
49,50
Antenna
2 holes for passing
collars through
4 fastening holes
Rail-DIN unlocking
lever
Casing base detail
Cables outlet
packing gland
Page
FR
EN
47
of 80