Product Presentation; General Description - ADEUNIS LoRaWAN 863-870 ANALOG PWR Guide Utilisateur

LoRaWAN 863-870 ANALOG PWR - Guide utilisateur / User guide version V2.0.2

1. PRODUCT PRESENTATION

IMPORTANT NOTE: The LoRaWAN 863-870 ANALOG PWR can only be started with a magnet.
Description:
• The ADEUNIS RF LoRaWAN 863-870 ANALOG PWR is a ready-to-use radio transmitter enabling any type of 0-10V or 4-20mA sensor to
be converted into a wireless communicating sensor.
FR
• This product meets the needs of users who need to remotely monitor data of any kind (temperature, pressure, level, humidity, CO², speed,
brightness, opening, etc.)
• The use of the LoRaWAN protocol allows you to integrate the LoRaWAN 863-870 ANALOG PWR into any network that is already de-
ployed.
• Two sensors can be supported by a single LoRaWAN 863-870 ANALOG PWR transmitter.
• The product transmits the data from the sensors either periodically or in an event-related way based on top or bottom thresholds or on
EN detection of a change of state on its digital inputs.
• The configuration of the transmitter is accessible by the user via a micro-USB port, allowing in particular a choice of modes of transmis-
sion, periodicity or type of interface (0-10V or 4-20mA).
• The LoRaWAN 863-870 ANALOG PWR is powered by an external power supply.
IMPORTANT NOTE 1: The LoRaWAN 863-870 ANALOG PWR is delivered by default with OTAA configuration, allowing the user to declare his/
her product to a LoRaWAN operator.
IMPORTANT NOTE 2: The LoRaWAN 863-870 ANALOG PWR can transmit measurements from the sensors but does not feed them (except
the digital version).
Composition of the package
The product is supplied in a cardboard box containing the following items:
top casing, electronic card, casing base plate,
cable gland, 3 gland seals, 2 CBLZ 2.2 x 19mm screws, 2 Fischer SX4 plugs

1.1. General description

Casing base
Antenna
2 holes for passing
collars through
4 fastening holes
Rail-DIN unlocking
lever
Casing base detail
Cables outlet
packing gland
Page 50 of 87