Sigfox BREATH - Guide utilisateur / User guide version V1.0.0
4.3.
Installation requirements for the device
It is advised to use the device for a tertiary and domestic usage:
- Fixed to a whole at 1.5 meter high, in a non-landlocked area
- Placed on a desk
To obtain a precised air quality, it is advised to follow these requirements:
- Do not use the sensor in outdoor
FR
- Do not place the device in front of the sun, or next to a heating or a cold source, or in a draft
- Let a minimum of one meter from a door or window
- When placed on a desk, avoid direct proximity to human respiration
- Do not install the device to close to the floor, minimum 30 cm
- Do not install the sensor in a in a dusty or unmaintained area (garage, cellar..)
- Do not install the sensor in a place where relative humidity overpass 95% (bathroom, cloakrooms, spa, laundry room..).
- Do not install the sensor in a zone where it can be damaged or snatched.
EN
PAY ATTENTION: the top of the casing should be accessible with a screwdriver. Do not fix the device under an object or too closed to the
ceiling.
5. HISTORY
Version
V1.0.0
Content
Creation
Page
52
of 52