Device Configuration; Iot Configurator; Advanced Mode; Connecting The Device To A Computer - ADEUNIS Sigfox RC1 ANALOG Guide Utilisateur

Masquer les pouces Voir aussi pour Sigfox RC1 ANALOG:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

sigfox RC1 ANALOG - Guide utilisateur / User guide version V2.0.1
3.

DEVICE CONFIGURATION

The product can be configured using the USB interface and in two modes: or using the IoT Configurator (a user
friendly application, recommended) or using the AT command.
WARNING : the connection of the USB cable is power consuming and has an highly impact on the de-
vice autonomy.
FR
EN

3.2. Advanced mode

3.2.1

Connecting the device to a computer

Connect the product to the USB input of a computer. The product has a Type B micro USB connector.
During connection, the device must be recognized by the computer as a Virtual Com Port (VCP) device.
Using Windows: Verification that the device has been recognized to be functioning properly can be obtained by con-
sulting the device manager. You should see the USB series device with a corresponding COM port number appear
during connection.
If you are not able to see a device of this type, you must install the USB driver for this device, available to download from our website:
https://www.adeunis.com/en/downloads/
Select:
Driver USB-STM32_x64, if your computer is a 64 bits system
Driver USB-STM32, if your computer is a32 bits system

3.1. Iot Configurator

The IoT Configurator is a adeunis® application developed to facilitate the
device configuration using a user-friendly interface. The IoT Configurator
can be used on a smartphone or a tablet using Android or on a computer
using Windows.
Compatible Windows 10 only and Android 5.0.0 minimum
Connect the micro-USB interface of the product to the computer or the smartphone. The
application recognized automatically the product, download the configuration parameters and
allows to configure quicly and instinctively thanks to forms (drop down menu, check box, text
box..). The application allows to export an applicative configuration to duplicate it on other
products in few clicks. The IoT Configurator is always updated with new features so don't
forget to update the application.
For Smartphone or tablet:
Free application available on Google Play
https://play.google.com/store/apps/details?id=com.adeunis.IoTConfiguratorApp
For computer: directly available on Adeunis website
https://www.adeunis.com/en/downloads/
WARNING : the USB connection does not supply power to the product, it
induces a consumption of the product as long as the one is connected. It is
therefore important not to leave the product connected too long.
Page
62
of 86

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Arf8191aaArf8191ba

Table des Matières