Wiring Of Analog Sensors; Wiring Of The Digital Triggering Inputs - ADEUNIS Sigfox RC1 ANALOG Guide Utilisateur

sigfox RC1 ANALOG - Guide utilisateur / User guide version V2.0.1

5.4. Wiring of analog sensors

Example of Analog sensor(s) assembly
Electric power supply example:
10-29 V, 100 mA (depending on
the sensor's needs
FR
EN

5.5. Wiring of the digital triggering inputs

The wiring of the digital inputs allows acquisition on the analog channels and a transmission of data on occurrence
of an event on these inputs.
Sensor 1
Sensor 2
Temperature + humidity sensor
GND_1
GND_2
Digital triggering on channel 1
Digital triggering on channel 2
4-20mA
Channel 1
GND
0-10V
4-20mA
Channel 2
GND
0-10V
Digital triggering on channel 1
Digital triggering on channel 2
Direct mounting digital
sensor(s)
Page 76 of 86