General Safety Information - DT SWISS F 535 ONE Manuel D'utilisation

Congratulations on the purchase of your new DT Swiss fork! You have purchased a quality product
made by DT Swiss.
1. GENERAL INFORMATION
This user manual is intended for the user of the fork. It includes information on the assembly,
maintenance and care of the fork along with the provisions of the warranty.
For further information and activities refer to www.dtswiss.com.
Users must read and understand this manual before using the component. Third-party users must
also be informed about the following provisions. Keep this instruction manual safe in case you need to
refer to it later.
2. SAFETY

2.1 GENERAL SAFETY INFORMATION

DANGER
Incorrect handling, installation, maintenance or servicing can lead to accidents causing severe
injuries or death!
• Compliance with the following provisions is a prerequisite for accident-free use and faultless
performance.
• Assembly and maintenance of the fork requires a basic knowledge of handling bicycle
components. If in any doubt, consult your retailer.
• The fork must only be used in accordance with its intended use. Otherwise the user shall
assume full responsibility.
• The fork must be compatible with all parts of the bicycle.
• Before the first ride the fork must be checked for free movement.
→ The fork crown must not touch the down tube when the handlebar is fully turned!
→ The fender must not touch the down tube when the fork is fully compressed!
→ The tyre must not touch the fender or fork when the fork is fully compressed!
• Maintenance and repair of the fork must only be carried out by a trained specialist.
• None of the add-on parts must have any sharp edges.
• Only use original DT Swiss accessories and spare parts.
• The fork must not be changed or modified.
• The fork must not be used if it is damaged or there are any signs of damage. If in any doubt,
consult your retailer.
2.2 COMPATIBILITY
Do not use the fork on bicycles with bicycle trailers.
Do not use front wheels with a hub motor.
F 535 ONE - User Manual V2021.08
17