Maintenance And Cleaning - Eurochron EFWS 700 Mode D'emploi

18. MAINTENANCE AND CLEANING

There are no parts that require maintenance by you inside the product. Therefore,
never open it (except for the procedure described in these operating instructions
for inserting or replacing the batteries).
Servicing or repair must only be carried out by a specialist or specialist workshop.
To clean the exterior of the basis station or the outdoor sensor, a dry, soft and clean
cloth is sufficient.
Remove dust on the basis station with a long-haired, soft and clean brush and a
vacuum cleaner.
Do not apply too much pressure to the display, this can cause scratch marks
or failures of the display.
Use a slightly damp soft cloth to remove stronger contamination from the outdoor
sensor.
Never use any aggressive cleaning agents, cleaning alcohol or other chemical
solutions, since these may damage the casing or even impair function.
62