Eurochron EFWS 700 Mode D'emploi page 50

—
Briefly press the button "MODE" (5).
The minutes display flashes.
—
Set the minutes with the buttons "+" (2) or "-" (4). Keeping the respective button
down for some time will adjust quickly.
—
Briefly press the button "MODE" (5).
The seconds display flashes.
—
Briefly push the "+" (2) or "-" (4) buttons to reset the seconds to "00".
—
Briefly press the button "MODE" (5).
The year display flashes.
—
Set the year with the buttons "+" (2) or "-" (4). Keeping the respective button
down for some time will adjust quickly.
—
Briefly press the button "MODE" (5).
The display shows the date; above, "D" and "M" flashes.
—
Use the buttons "+" (2) or "-" (4) to choose the order in which the display shows
the date ("D") and month ("M").
When setting the order of date ("D") and month ("M"), DCF-reception is not
switched off. The reception symbol " " (N) remains active.
—
Briefly press the button "MODE" (5).
The month display ("M") flashes.
—
Set the minutes with the buttons "+" (2) or "-" (4). Keeping the respective button
down for some time will adjust quickly.
—
Briefly press the button "MODE" (5).
The date display ("D") flashes.
—
Set the date with the buttons "+" (2) or "-" (4). Keeping the respective button
down for some time will adjust quickly.
—
Briefly press the button "MODE" (5).
The time zone display flashes; at the right of the display, "TZ" appears (= "Time
Zone").
—
Use the buttons "+" (2) or "-" (4) to set the time zone in the area of -12.....+12
hours. Keeping the respective button down for some time will adjust quickly.
When setting the time zone, DCF reception is not deactivated. The reception
symbol " " (N) remains active.
50