Setup Connections - Schiller Argus VCM Mode D'emploi

ARGUS VCM

Setup Connections

Setup Connections
Use only provided sensor pulse oximetry cables and SpO2 sensors with Use only provided sensor pulse oximetry cables and SpO2 sensors with
Biocompatibility testing has been conducted on sensors in compliance with ISO10993-1, Biocompatibility testing has been conducted on sensors in compliance with ISO10993-1,
Biological Evaluation of Medical Devices, Part 1: Evaluation and Testing. The sensors have Biological Evaluation of Medical Devices, Part 1: Evaluation and Testing. The sensors have
passed the recommended biocompatibility testing and are therefore in compliance with passed the recommended biocompatibility testing and are therefore in compliance with
ISO10993-1. ISO10993-1.
When selecting a sensor, consider patient's weight and activity, adequacy of perfusion, When selecting a sensor, consider patient's weight and activity, adequacy of perfusion,
availability of sensor sites, need for sterility, and anticipated duration of monitoring. For availability of sensor sites, need for sterility, and anticipated duration of monitoring. For
more information, refer to Table 5, or contact to Schiller sales department. more information, refer to Table 5, or contact to Schiller sales department.
1. Observe all warnings and cautions in the directions for use.
2. Carefully apply the sensor to the patient, as described in the sensor directions for use. The
sensor may be connected directly to the connector. Typically, however, it is more
convenient to connect the sensor to the monitor by using an SpO2 pulse oximetry cable.
OXIMAX Durasensor ® Oxygen transducer
(Reusable, non-sterile)
OXIMAX oxygen transducer (Sterile, single-use only)
OXIMAX oxygen transducer (Sterile, single-use only)
OXIMAX adhesive reflectance oxygen transducer
Figure 23. SpO2 Setup Connections
Table 5. SpO2 Sensors
Sensor
ARGUS VCM
SpO /Pulse Rate Monitoring
2
ARGUS VCM ARGUS VCM
1
SpO2 Sensor/ Cable Connector
Model Patient Size
DS-100A >40 kg
<3 or >40 kg
MAX-N
MAX-A >30 kg
MAX-FAST >40 kg
Operator's Manual
. .
43