Setting Alarm Volume - Schiller Argus VCM Mode D'emploi

ARGUS VCM

Setting Alarm Volume

This procedure will enable you to set audible Alarm Volume of
With the monitor in the normal monitoring mode:
1. Press the Mode button 5 times until the Alarm Volume setting indicator and
current alarm volume are displayed.
2. Select a level of alarm volume between 1 and 8, using the Up/Down (+/-)
selection buttons.
3. Press any other button to return to normal operation. If there is no activity for
3 seconds, the monitor will return to normal operation.
Figure 14. Alarm Volume Setting
Operator's Manual
ARGUS VCM
Using the Monitor
monitor.
ARGUS VCM
31