Setting Temperature Units And Modes - Schiller Argus VCM Mode D'emploi

ARGUS VCM

Setting Temperature Units and Modes

Setting Temperature Units and Modes
This procedure will allow you to set temperature type and measurement units of This procedure will allow you to set temperature type and measurement units of
with temperature option. You may select a temperature measurement unit either with temperature option. You may select a temperature measurement unit either
VCM VCM
Celsius (°C) or Fahrenheit (°F) to be displayed. Also you may select whether to use Celsius (°C) or Fahrenheit (°F) to be displayed. Also you may select whether to use
Monitor mode or Predictive mode for taking temperatures. For more information, refer Monitor mode or Predictive mode for taking temperatures. For more information, refer
to page 49 in Temperature Monitoring section of this manual. to page 49 in Temperature Monitoring section of this manual.
With the monitor in the normal monitoring mode: With the monitor in the normal monitoring mode:
1. Press the Mode button 3 times until the Temperature units and modes are on 1. Press the Mode button 3 times until the Temperature units and modes are on
(a selected unit/mode is shown flashing). (a selected unit/mode is shown flashing).
2. Select desired temperature unit and mode, using the Up/Down (+/-) selection 2. Select desired temperature unit and mode, using the Up/Down (+/-) selection
buttons. buttons.
Fahrenheit Predictive (F) Fahrenheit Predictive (F)
Celsius Predictive (C) Celsius Predictive (C)
3. Press any other button to return to normal operation. If there is no activity for 3. Press any other button to return to normal operation. If there is no activity for
3 seconds, the monitor will return to normal operation. 3 seconds, the monitor will return to normal operation.
Fahrenheit Monitored (F M) Fahrenheit Monitored (F M)
Celsius Monitored (C M) Celsius Monitored (C M)
Figure 12. Temperature Units and Modes Setting
ARGUS VCM
Using the Monitor
Operator's Manual
ARGUS ARGUS
29