Setting Date And Time - Schiller Argus VCM Mode D'emploi

Using the Monitor

Setting Date and Time

This procedure will enable you to set current date and time of
With the monitor in the normal monitoring mode:
1. Press and hold the Mode button for 3 seconds or more until the monitor
2. Press the Mode button twice until the Time indicator and Hour set are
3. Press the Mode button until the Time indicator and Minute set are flashing.
4. Press the Mode button until the Time indicator and Second set are flashing.
5. Press the Mode button until the Date indicator and Year set are flashing.
6. Press the Mode button until the Date indicator and Month set are flashing.
7. Press the Mode button until the Date indicator and Day set are flashing.
8. Pressing buttons other than the Mode button also returns to normal operation.
26
ARGUS VCM
enters Configuration mode.
flashing.
Set current time to increment Hour up and down between 0 and 23, using the
Up/Down (+/-) selection buttons.
Set current minute between 00 and 59, using the Up/Down (+/-) selection
buttons.
Set current second between 00 and 59, using the Up/Down (+/-) selection
buttons.
Set current year, using the Up/Down (+/-) selection buttons.
Set current month, using the Up/Down (+/-) selection buttons.
Set current day, using the Up/Down (+/-) selection buttons.
If there is no activity for 5 seconds, the monitor will return to normal
operation.
Figure 9. Date and Time Setting
Operator's Manual
ARGUS VCM
monitor.
ARGUS VCM
Hour
Minute
Second
Year
Month
Day