Printing Patient Data (Manual Mode) - Schiller Argus VCM Mode D'emploi

Printing

Printing Patient Data (Manual Mode)

You can print vital-signs measurement data each time you press the Print button (Manual
printing), or you can store patient data and then print all of it at one time (Batch printing).
Follow the instructions to print stored data if an optional printer is installed.
1. Press Print button when the monitor is in Normal or Review mode.
Note: The print button is not enabled during an NIBP cycle.
Note: The monitor sounds an invalid button tone when the printer door opens or when
paper runs out.
68
ARGUS VCM
If the monitor is not printing, press the Print button to start printing.
If the monitor is printing, press the Print button to stop printing.
Operator's Manual
ARGUS VCM