Saving, Displaying And Deleting Measured Values - Beurer BC 57 Mode D'emploi

7. Saving, displaying and deleting
measured values
The results of every successful measurement are
stored together with the date and time. The oldest
measurement is overwritten in the event of more than
60 measurements.
• Once the device is switched off, select the desired
user memory (
and confirm with the START/STOP button
• The average value of all measurements appears on
the display.
®
• If Bluetooth is activated (the
the display), the blood pressure monitor attempts to
connect to the app. If you press the memory button
M in the meantime, the transfer is cancelled and the
average values are displayed. The
longer shown. The buttons are deactivated and the
symbol ceases to flash as soon as a connection
is established and the data is transferred.
) using the memory button M
symbol flashes on
symbol is no
A flashes on the display.
The average value of all saved measured
values in this user memory is displayed.
• Press the memory button M.
AM flashes on the display.
The average value of the morning meas-
urements for the last 7 days is displayed
.
(morning: 5.00 a.m. – 9.00 a.m.).
• Press the memory button M.
PM flashes on the display.
The average value of the evening meas-
urements for the last 7 days is displayed
(evening: 6.00 p.m. – 8.00 p.m.).
32