Displaying And Deleting Measured Values - Beurer BC 21 Mode D'emploi

7. Displaying and deleting measured
values
The results of every successful measurement are
stored together with the date and time. The oldest
measurement is overwritten in the event of more
than 60 measurements.
• To retrieve the measurement, press the
memory button M.
A flashes on the display.
The average value of all saved
measured values in this user me-
mory is displayed.
To change the user memory, press and hold the
memory button M for approx. 3 seconds.
• Press the memory button M.
AM flashes on the display.
The average value of the morning
measurements for the last 7 days
is displayed (morning: 5.00 a.m. –
9.00 a.m.).
• Press the memory button M.
PM flashes on the display.
The average value of the evening
measurements for the last 7 days
is displayed (evening: 6.00 p.m. –
8.00 p.m.).
• When you press the memory
button M again, the last in-
dividual measurement is dis-
played (in this example, meas-
urement 03 of user 1).
• When the memory button M is pressed again,
you can view your individual measurements.
• To switch the device off again, press the
START/STOP button
You can exit the menu at any time by pressing
the START/STOP button
31
.
.