Beurer BC 57 Mode D'emploi page 33

• When the memory button M is pressed
again, the last individual measurement
is displayed (in this example, measure-
ment 03).
• When the memory button M is pressed again, you
can view your individual measured values.
• To switch the device off again, press the START/
STOP button .
You can exit the menu at any time by pressing the
START/STOP button
• To clear the memory of the relevant user memory,
you must first select a user memory.
• Start the retrieval of the average measured values.
A flashes on the display and the average value of
all saved measured values in this user memory is
displayed.
• Press and hold the memory button M for 5 sec-
onds depending on the user memory you are in.
All the values in the current user memory
are deleted.
•
.
33
• To clear individual measurements from the relevant
user memory, you must first select a user memory.
• Start individual measurement access.
• Press and hold the memory button M for 5 sec-
onds (depending on the user memory you are in).
• The selected value is deleted. The device briefly
displays [L 00.
• If you would like to delete other values, repeat the
process described above.
You can switch off the device at any time by pressing
the START/STOP button
Transfer via Bluetooth
®
It is also possible to transfer the measured values saved
on the device to your smartphone via Bluetooth
You will need the " beurer Health Manager" app for this.
This is available in the Apple App Store and from Google
Play.
Proceed as follows to transfer values:
If Bluetooth ® is activated in the settings menu, the data
is transferred automatically after the measurement. The
symbol appears in the top left of the display (see chapter
4 "Preparing the measurement").
.
.
®