Bluetooth ® Settings; Preparing For The Measurement - Beurer BC 57 Mode D'emploi

System requirements for the PC software „ beurer
Health Manager" :
• from Windows 7 SP1
• from USB 2.0 (Type A)
System requirements for the app "beurer Health-
Manager":
• iOS ≥ 8.0, Android TM
• Bluetooth ® ≥ 4.0
List of compatible devices:

4. Preparing for the measurement

Inserting the batteries
• Remove the battery
compartment lid on
the left side of the
device.
• Insert two 1.5 V mi-
cro (alkaline type LR03) batteries. Make sure that the
batteries are inserted the correct way round. Do not use
rechargeable batteries.
• Close the battery compartment lid again carefully.
≥ 4.4
27
If the battery change symbol
appears, no further measurements are possible and you
must replace all batteries.
flashes on the display. Now set the date and time as
described below.
• The empty, completely flat batteries must be disposed
of through specially designated collection boxes, recy-
cling points or electronics retailers. You are legally re-
quired to dispose of the batteries.
• The codes below are printed on batter-
ies containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.
Set the hour format, date, time and
Bluetooth ® settings
This menu allows you to set the following functions, one
after another.
Hour
Date
➔
format
It is essential to set the date and time. Otherwise, you will
not be able to save your measured values correctly with a
date and time and access them again later.
If you press and hold the memory button M, you can
set the values more quickly.
is flashing and Lo
Time ➔ Bluetooth
➔
®