Disposal; Technical Specifications - Beurer BC 54 Mode D'emploi

Error Possible
message cause
The data could
not be sent via
®
Bluetooth
A device error
has occurred.
If the problems persist despite the proposed corrective
actions, please contact customer service.

10. Disposal

Repairing and disposing of the device
• Do not repair or adjust the device yourself. Proper op-
eration can no longer be guaranteed in this case.
• Do not open the device. Failure to comply will result in
voiding of the warranty.
• Repairs must only be carried out by Customer Services
or authorised suppliers. Before making a claim, please
check the batteries first and replace them if necessary.
Solution
Proceed as described in
chapter „7. Usage" under
. the section
„Transfer via
Blue-
" into the manual
®
tooth
memory mode and try to
restart the data transfer.
Please repeat the mea-
surement after a pause
of one minute.
• For environmental reasons, do not dispose of the de-
vice in the household waste at the end of its
useful life. Dispose of the unit at a suitable local
collection or recycling point. Dispose of the de-
vice in accordance with EC Directive – WEEE
(Waste Electrical and Electronic Equipment). If you
have any questions, please contact the local authorities
responsible for waste disposal.
Disposing of the batteries
• Batteries must not be disposed of with household
waste. They may contain toxic heavy metals and are
subject to special waste treatment.
• The codes below are printed on
batteries containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.

11. Technical specifications

Model no.
Measurement
method
Measurement range Cuff pressure 0-299 mmHg,
40
BC 54
Oscillometric, non-invasive blood
pressure measurement on the wrist
Systolic 60-230 mmHg,
Diastolic 40-130 mmHg,
Pulse 40-199 beats/minute