Beurer BC 54 Mode D'emploi page 34

• The systolic pressure, diastolic pres-
sure and pulse rate measurements
are displayed.
• appears if the measurement could
not be performed properly. Observe
the chapter „9. What if there are prob-
lems?" in these instructions for use and repeat the
measurement.
• Press the START/STOP button
off the blood pressure monitor. The measure-
ment is then stored in the selected user memory.
If Bluetooth ® data transfer is activated, data is trans-
ferred after pressing the START/STOP button
The symbol
®
Bluetooth
play. The blood pressure monitor now attempts
to connect to the app for approx. 30 seconds.
The Bluetooth symbol stops flashing as soon as a
®
connection is established. All measurement data is au-
tomatically transferred to the app. Once the data has
been successfully transferred, the device switches off.
• If a connection to the app cannot be established after
30 seconds, the Bluetooth
to switch
flashes on the
® symbol goes out and the
blood pressure monitor switches off automatically after
5 seconds.
• If you forget to turn off the device, it will switch off auto-
matically. In this case too, the value is stored in the se-
lected or most recently used user memory.
• Wait for at least 1 minute before taking
another measurement.
Evaluating results
Cardiac arrhythmia:
This device can identify potential disruptions of the heart
rhythm when measuring and if necessary, indicates this
after the measurement with the symbol
This can be an indicator for arrhythmia. Arrhythmia is an
illness in which the heart rhythm is abnormal because of
flaws in the bioelectrical system that regulates the heart-
beat. The symptoms (skipped or premature heart beats,
.
pulse being slow or too fast) can be caused by factors
dis-
such as heart disease, age, physical make-up, excess
stimulants, stress or lack of sleep. Arrhythmia can only
be determined through an examination by your doctor.
If the symbol
urement has been taken, repeat the measurement. Please
ensure that you rest for 5 minutes beforehand and do not
speak or move during the measurement. If the symbol
appears frequently, please consult your doctor. Self-
34
is shown on the display after the meas-
.