Beurer BC 54 Mode D'emploi page 36

Saving, displaying and deleting measured values
The results of every successful measurement are
stored together with the date and time. The oldest
measurement is overwritten in the event of more than
60 measurements.
• To select the corresponding user memory, press
the M1 memory button (for user ) or M2 (for user
) on the switched-off device. Confirm your selec-
tion by pressing the START/STOP button
®
• If Bluetooth is activated (the
the display), the blood pressure monitor attempts to
connect to the app. The buttons are deactivated and
the symbol ceases to flash as soon as a connec-
tion is established and the data is transferred.
If you press the memory button M1 or M2
in the meantime, the transfer is cancelled.
The symbol is no longer shown.
.
symbol flashes on
36
A is displayed.
The average value of all saved measured
values in this user memory is displayed.
• Press the memory button M1.
AM is displayed.
The average value of the morning meas-
urements for the last 7 days is displayed
(morning: 5.00 a.m. – 9.00 a.m.).
• Press the memory button M1.
PM is displayed.
The average value of the evening meas-
urements for the last 7 days is displayed
(evening: 6.00 p.m. – 8.00 p.m.).