Initial Use - Beurer BC 54 Mode D'emploi

Information on the display:
1. Risk indicator
2. Symbol for Bluetooth
3. Time and date
4. Systolic pressure
5. Diastolic pressure
6. Calculated pulse value
7. Cardiac arrhythmia symbol
Pulse symbol
8. Battery status indicator
9. Release air
10. User memory /
11. Memory space number/memory display
average value ( A ), morning ( AM ), evening ( PM )
1 2
11
10
9
8
7
6
transfer
®
3
4
5

6. Initial use

Inserting the batteries
• Remove the battery
compartment lid on
the left side of the
device.
• Insert two 1.5 V AAA
micro (alkaline type LR03) batteries. Make sure that the
batteries are inserted the correct way round. Do not use
rechargeable batteries.
• Close the battery compartment lid again carefully.
Now set the date and time as described below.
If the battery change symbol
appears, no further measurements are possible and you
must replace all batteries. Once the batteries have been
removed from the device, the date and time must be set
again. Any saved measured values are retained.
Set the hour format, date, time and Bluetooth
settings
It is essential that you set the date and time. Otherwise,
you will not be able to save your measured values cor-
rectly with a date and time and access them again later.
30
is flashing and
®