Initial Use; Inserting The Batteries - Beurer BM 96 Cardio Mode D'emploi

6. Initial use

Inserting the batteries

• Open the battery compartment lid.
• Insert four 1.5 V AA (alkaline type LR6) batteries. Make sure that the bat-
teries are inserted the correct way round in accordance with the markings.
Do not use rechargeable batteries.
• Carefully close the battery compartment lid again.
• All display elements are briefly displayed. Now set the date and time as described
below.
If the battery replacement symbol
urements and must replace all batteries. Once the batteries have been removed from
the device, the date and time must be set again. Any saved measured values are retained.
Set the hour format, time, date, alarm, Bluetooth
It is essential that you set the date and time. Otherwise, you will not be able to save your measured values
correctly with a date and time and access them again later.
In this menu you can adjust the following settings in succession:
Hour format ➔
Press and hold the START/STOP button
• Select 12h or 24h mode using the function buttons / . Press M2 to confirm. The hour display will
start to flash. Set the hour with the function buttons / and confirm with M2.
• Set the minute, year, month and day and confirm each with the setting button M2.
You can go to the previous settings by pressing M1.
flashes, you can no longer perform any meas-
Time Date
➔
® and ECG settings
Alarm
➔
on the device when switched off for approx. 5 seconds.
46
➔ Bluetooth ®
➔
ECG