Displaying And Deleting Ecg Measured Values; Transferring Measurements; Transfer Via Bluetooth ® Low Energy Technology - Beurer BM 96 Cardio Mode D'emploi

Displaying and deleting ECG measured values

The device has two user memories. Each user memory can store up to 60* measurements. Once all
memory spaces in a user memory have been used, the oldest measurements are replaced by the
most recent.
You can access stored measurements on the device at any time. Proceed as follows:
• With the device switched off, press the START/STOP button
the selected user memory is displayed.
To access the measured values in the second user memory, press M2.
• To navigate between the individual measurements, press the function buttons / .
• To delete the memory of the selected user, press the function button for 5 seconds.
• appears on the display. All the values in the selected user memory have now been deleted.

Transferring measurements

Transfer via Bluetooth
It is also possible to transfer the measured values saved on the device to your smartphone using Bluetooth
low energy technology. You will need the "beurer HealthManager Pro" / "beurer HealthManager" app for
this. The apps are available free of charge on the Apple App Store and from Google Play.
When connecting for the first time, a randomly generated six-digit PIN code is displayed on the
device, and at the same time an input field appears on the smartphone in which you must enter
this six-digit PIN code. After successfully entering the code, the device will be connected to your
smartphone. If your smartphone has a protective cover, remove this to ensure that there is no in-
terference during the transfer.
* With 30-second measurement. Deviation possible in the event of a longer measurement duration.
® low energy technology
. The last stored measured value in
61
®