Beurer BM 96 Cardio Mode D'emploi page 67

Display accuracy
Measurement inaccuracy
Memory
Dimensions
Weight
Cuff size
Permissible operating conditions
Permissible storage and transport
conditions
Power supply
Battery life
Classification
Data transfer via Bluetooth
wireless technology
The serial number is located on the device or in the battery compartment.
Technical information is subject to change without notification to allow for updates.
• This device conforms with the European standard EN 60601-1-2 (in accordance with CISPR 11,
IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-8) and is subject to particular precautions with regard to
electromagnetic compatibility. Please note that portable and mobile HF communication systems may
interfere with this device.
Systolic ± 3 mmHg,
Diastolic ± 3 mmHg,
Pulse ± 5% of the value shown
Max. permissible standard deviation according to clinical testing:
Systolic 8 mmHg/diastolic 8 mmHg
2x 60 memory spaces (With 30-second measurement. Deviation possi-
ble in the event of a longer measurement duration.)
Main unit: L 120 mm x W 144 mm x H 53 mm
ECG stick: D 22 mm x H 120 mm
Main unit: Approximately 490 g (without batteries, with cuff)
ECG stick: Approximately 40 g
22 to 42 cm
+10 °C to +40 °C, 10 to 85 % relative humidity (non-condensing)
-20 °C to +55 °C, 10 to 90 % relative humidity,
800 – 1050 hPa ambient pressure
4x 1.5 V AA batteries
For approx. 300 measurements, depending on levels of blood pressure,
pump pressure and ECG measurement length
Internal supply, IP21, no AP or APG, continuous operation
Blood pressure: Application part, type BF
ECG stick: Application part type CF
® The product uses Bluetooth
2.400 – 2.483 GHz, maximum transmission power radiated in the frequen-
cy band < 20 dBm, compatible with Bluetooth
tablets
® low energy technology, frequency band
67
® ≥ 4.0 smart phones /