Charging - Trek RIDE+ Pro Manuel Du Propriétaire

Quick start - Charging

1.5 Charging

• Power supply
The charging process is the same for rack batteries (39-cell and 30-cell) and batteries mounted
on the down tube (39-cell and 52-cell). All batteries can be charged using the power supply.
• Charging the battery-pack:
1. Turn the system off.
2. Connect the connector of the power supply to the charging port of
the battery and connect the power supply to the power outlet.
Warning: Replace a damaged power cable immediately to prevent an electric shock.
3. The battery will emit beeps and then the charging port will turn
orange. When the battery is full, the charging port will turn green.
To stop charging, just disconnect both connectors.
GREEN/ORANGE
10
RIDE+ R250
RIDE+ R320
GREEN/ORANGE
RIDE+ R320
RIDE+ C320 and RIDE+ C420
GREEN/ORANGE