Quick Start; Bionx G2 Controller - Trek RIDE+ Pro Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Quick start - BionX G2 Controller
1.1 BionX G2 Controller
• Switching system On / Off
Push any of the two upper buttons to switch the system
'on'. Push
button to switch the system off. When
switched on, the bike is in cycle mode (zero assist).
• Assistance/ Regeneration Level
Push '+' button once for assistance level 1, again for
higher levels. Push '-' button to go to a lower level.
Regeneration levels can be controlled in a similar way.
Push '-' button once for regeneration level 1, again for a
higher level. Push '+' button to reduce regeneration.
Notice: It is strongly advised to ride away in a
straight line when an assistance level is selected. Never
select assistance level 3 or 4 during maneuvering or riding away in a tight corner. The powerful reaction
of motor might take you unawares.
• Switching lights On / Off
Press the
button for 2 seconds to switch On / Off the
display light, and, if present, the front and rear lights.
• See time, average speed, odometer, trip distance
Use
button to change computer functions (Order of
appearance: trip distance, odometer, average speed, time
of day). To prevent loss of riding information, please
make sure that the system is switched off before the
controller is removed from the bike.
• Using the remote
Some bikes have the controller positioned on a middle clamp, which means that
the controller can more easily be operated with a remote. This device can be used
to select a higher or lower assist or regeneration level without removing your hands
off the handlebars. The red throttle button on the BionX remote is a convenient
help to move the bike without pedaling (up to 4 km/h) walking next to the e-bike.
Caution:Beware of unintended use of the throttle button when the system is switched on.
6
1. Quick start
This manual has all the information that you'll
need to get the best from your electric bicycle.
We strongly recommend that you read it through.
However, for quick use of the bike, please read
the Quick Start guide for the type of controller
and battery on your bicycle.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ride+ easyRide+ easy ii

Table des Matières