Main Power Switch - EMAK Oleo-Mac OM 92 Manuel D'utilisation Et D'entretien

(7) MAIN POWER SWITCH

Serves to start up / shut off the engine. It has the following 4 positions:
(8) FORWARD DRIVE PEDAL
The pedal controls the power going to the wheels and regulates the speed of the machine forward.
ATTENTION: Changing the travel direction forwards / reverse is only possible after
stopping the machine!
(9) REVERSE TRAVEL PEDAL
The pedal controls the power going to the wheels and regulates the speed of the machine backwards.
Changing the travel direction forwards / reverse is only possible after stopping the
machine!
Parking brake engaged signal
Brake pedal applied signal
Ignition off / turn off the ignition
Turn on / turn off the headlights on the hood
Ignition on, the engine is running.
Start engine – starting position
The more the pedal is pushed towards the floor, the faster the machine will be
and vice versa.
When the pedal is released it will automatically return to the neutral position
and the machine will stop.
More information
The more the pedal is pushed towards the floor, the faster the machine will be
and vice versa.
When the pedal is released it will automatically return to the neutral position
and the machine will stop.
More information
5.5.
5.5.
38