Key Ignition Switch - EMAK RIDER EL63 Manuel D'utilisation

safety conditions have not been complied with, the engine
shuts down and cannot be restarted (
– In disengaging the blade (Pos. «A»), a brake is simultane-
ously activated which stops their rotation within a few sec-
onds.
Tecumseh engine:
The blade can only be engaged
by pressing the pedal (4.6.1) right
down; when the pedal is
released, the lever automatically
returns to position «A», disen-
gaging the blade.
Electric start:

4.11 KEY IGNITION SWITCH

This key operated control has
three positions:
«OFF» everything
is switched off;
«ON» activates all parts;
«START» engages the starter
motor.
On being released at the «START» position, the key will
automatically return to «ON».
EN 14
5.2).
4.6.1
4.11
4.12 ACCELERATOR LEVEL
Regulates the engine's r.p.m. The positions are indicated on
a plate showing the following symbols:
4.12
– The «CHOKE» position enriches the mixture so must only
be used for the time necessary when starting from cold.
– When moving from one area to another, put the lever in a
position between «SLOW» and «FAST».
– When cutting, go to the «FAST» position.
Manual start:
4.21 PULL START HANDLE
To start the engine, take the
starter cable handle and give it a
firm tug.
Then put the handle back in its
seat, guiding the cable as it auto-
matically rewinds.
«CHOKE» starting from cold
«SLOW» for minimum
engine speed
«FAST» for maximum engine
speed
4.21