EMAK RIDER EL63 Manuel D'utilisation page 68

6.4.2 Dismantling, replacing and remounting the blade
WARNING!
Always wear work gloves when handling the blade.
WARNING!
Damaged or bent blades must always be replaced; never try to repair them! ALWAYS USE MANUFAC-
TURER'S GENUINE REPLACEMENT BLADES BEARING THE
1. Dismantle
To dismantle the blade (2), hold it firmly and unscrew both nuts
(1).
1
EN 30
2
SYMBOL! Make sure the blade is correctly balanced.
2. Reassembling
Tighten both fixing nuts (1) using a torque wrench set to 60-65
Nm.
WARNING!
If necessary, replace nuts and bolts
only with GENUINE SPARE PARTS.
1
2