Maintenance; Safety Recommendations; Routine Maintenance - EMAK RIDER EL63 Manuel D'utilisation

6. MAINTENANCE

6.1 SAFETY RECOMMENDATIONS

WARNING!
Disconnect the spark plug cap,
remove the key (in the electric start models) or shift the
accelerator lever to «OFF» (in the manual start models)
and read the relevant instructions before starting any
cleaning, maintenance or repairs. Wear suitable clothing
and strong gloves for dismantling and refitting the blade
and in all other hazardous situations for the hands.
WARNING!
Never use the machine with worn or
damaged parts. Faulty or worn-out parts must always be
replaced and not repaired. Only use original spare parts:
The use or non-original and/or incorrectly fitted parts
will compromise the safety of the machine, may cause
accidents or personal injuries for which the
Manufacturer is under no circumstance liable or respon-
sible.
IMPORTANT
Never get rid of used oil, fuel or other
pollutants in unauthorised places!
WARNING!
All operations not described in chap-
ters 6.2 and 6.3 of this manual must be carried out by
your Dealer or a specialized Service Centre. Both have
the necessary knowledge and tools to ensure that the
work is carried out correctly without affecting the safety
of the machine.
EN 26

6.2 ROUTINE MAINTENANCE

6.2.1 Engine
Follow all the instruc-
tions in the engine
manual.
To drain the engine oil:
1. unscrew the topping
up cap (1);
2. fit the pipe (2) onto
the syringe (3) and
insert it right into the
hole;
3. using the syringe (3),
suck up all the en-
gine oil, bearing in
mind that you need
to repeat this opera-
tion a few times before all the oil is removed.
6.2.2 Transmission and gear unit
These are sealed single units which do not require mainte-
nance. They are permanently lubricated and this lubricant does
not need changing or topping up.
1 3
2