Parking Brake Lever; Brake Pedal - EMAK Oleo-Mac OM 92 Manuel D'utilisation Et D'entretien

(10) PARKING BRAKE LEVER

(11) BRAKE PEDAL

(12) MOWING DECK ELEVATION ADJUSTMENT LEVER
The lever serves to set the elevation height of the mowing deck from the ground.
When travelling without mowing, the lever must be set to position 7.
(13) BY-PASS LEVER – FREE MOVEMENT OF THE REAR WHEELS
The by-pass lever serves to disengage the transmission for the rear wheel drive and is used to push or
pull the machine without using the engine. The lever is located on the rear plate of the machine and has
the following two positions:
The parking brake has two positions. In position (1) the brake is not active,
after shifting to position (2) while stepping down on brake pedal the parking
brake is activated (will brake).
Stepping on the brake pedal will deactivate the parking brake and the lever will
automatically be released and shift to position (1).
Stepping on the brake pedal will slow down the riding mower.
The pedal is also used when starting the machine – it is only possible to
start up with the brake pedal applied.
The lever has 6 work positions, which correspond to a mowing height of 3 to
9 cm.
The higher the number of the lever position, the higher vegetation height
remains after mowing.
Position Rear wheel drive
(0)
(1)
DISENGAGED
ENGAGED
39
Use
Lever is extended - for pushing the
machine
Lever is inserted - for driving the
machine