Product Identification Label - EMAK Oleo-Mac OM 92 Manuel D'utilisation Et D'entretien

1.3 PRODUCT IDENTIFICATION LABEL AND OTHER LABELS WITH
SYMBOLS USED ON THE MACHINE

1.3.1 PRODUCT IDENTIFICATION LABEL

Every riding mower is marked with a product identification label, located underneath the seat. It can
be accessed by lifting the seat.
1. Machine model
2. Engine model
3. Year of production
4. Weight
5. Name and address of the manufacturer
1.3.1
6. EC codes used to assess the product's compliance
7. Compliance mark of the product
8. Logo of the manufacturer
9. Guaranteed noise level according to directive 2000/14/EC
The seller will write down the serial number on the other side of the front page of this manual
when handing over the machine.
1.3.2 OTHER LABELS AND THEIR MEANINGS
The following labels and stickers are attached to the machine:
Labels on the left and right side of the mowing deck:
1.3.2a
Labels on the fairing under the seat:
1.3.2b
It is strictly forbidden to remove or damage labels and symbols attached to the
accessory. In the event of damage or illegibility of the label, please contact the supplier or
machine manufacturer and request a replacement.
Danger
Rotating
tools
Danger
Caution,
deflected
objects
Mow up-
wards and
downwards
(the slope),
not sideways
Do not step
on
Guaranteed
noise level
Do not
touch during
operation
Read the
manual
Keep
unauthorised
persons
at a safe
distance
23
Before
cleaning or
repairing
the mower,
stop the
engine and
disconnect
the spark
plug lead.
Do not mow
near other
people
Do not
leave the
machine
when
driving
Do not
take on
passengers
Maximum
working
incline