Emptying The Dust Bin; Cleaning The Exhaust Air Fi Lter - DS Produkte Z 09391 Mode D'emploi

❐ Do not use any abrasive or scouring cleaners or cleaning pads to clean the device.
They could damage the surface.
• Clean the exhaust air fi lter regularly or if you notice that the suction power is declining.
• If needed, clean the housing with a damp, soft cloth. Dry it off with a soft cloth.
• Regularly remove hair and lint from the nozzles.

Emptying the dust bin

Cleaning the exhaust air fi lter
The exhaust air fi lter is a fl eece fi lter and is located in the dust bin container.
1. Pull the mains plug out of the socket and open the dust bin container by pushing the
release button. Pull the dust bin lid up.
Replace the dust bin as soon as it is full, that is, when
you notice that the suction power is diminishing or the
dust bin change indicator (see arrow on the image) turns
red. Also clean the exhaust air fi lter regularly to prevent
the motor from overheating.
1. Pull the mains plug out of the socket and remove the
suction hose by depressing the two catches on the side
of the suction hose and at the same time, pulling the
suction hose out of the suction tube connection.
2. Open the dust bin container by pulling the release but-
ton on the dust bin lid and at the same time folding the
lid up.
3. Pull the dust bin holder with the full dust bin up and out
in the opposite direction of the arrow marking on the
dust bin.
4. Insert a new dust bin in the dust bin holder so that the
arrow on the dust bin is pointing down.
5. Close the dust bin lid by folding it shut. It must audibly
lock into place.
21