Removing/Fitting The Side Flaps; Replacing The Hand Control - Invacare Aquatec ORCA Manuel De Maintenance

Aquatec® ORCA / ORCA F / ORCA XL

4.5 Removing/fitting the side flaps

●○○
Difficulty:
Pos. Designation
Side flap
A
Removal
1. Press in the clips of side flap A and slowly draw out
the side flap.
Fitting
1. Slide the clips of side flap A evenly into the slots of
the seat plate until they engage.
12
Tool: —
Article
Quantity
number
15892 2

4.6 Replacing the hand control

●○○
Difficulty:
Po-
Designation
s.
Hand control
A
1. Pull the hand control plug by the blue casing,
loosening it from the jack plug.
2. Place the blue casing of the new hand control onto
the jack plug.
3. Check all the functions of the bath lift.
WARNING!
– The hand control should only be replaced as
a complete component.
– Do not open or attempt to repair the hand
control.
Please contact Invacare® customer service by
phone or order a new hand control using the
electronic spare parts catalog at www.invacare.de.
Tool: —
Quan-
Article number
tity
1470902 1
1590348-B