Invacare Aquatec KOGIA Manuel D'utilisation page 13

4.
Place the seat B on the bottom of the empty bathtub.
Ensure that the spindle foot retainer C is pointing
towards the end of the bathtub opposite the drain A.
5.
Fold the side flaps of the seat outwards.
1584939-B
Fig. 4-4
Fig. 4-5
6.
Place the backrest A (without the battery) onto the
seat so that the hooks B of the backrest fit into the
hinges C of the seat plate D.
Risk of Damage
Damage to the product caused by the spindle
foot slipping out.
– Ensure that the spindle is fully retracted and
the spindle foot is level and not twisted, before
folding up the backrest.
– Once the backrest is folded up, ensure that the
spindle foot is in the spindle foot retainer.
Fig. 4-6
Setup
13