Setup; Safety Information; Setting Up Bath Lift - Invacare Aquatec KOGIA Manuel D'utilisation

4 Setup

4.1 Safety Information

Risk of Damage
– Check all parts for transport damage and check
before usage. Contact your provider if required.
– Ensure during assembly that the parts are
positioned correctly with respect to one
another.
– It is recommended to wash the covers before
first use, refer to 7.2 Cleaning and Disinfection,
page 21.

4.2 Setting up Bath Lift

WARNING!
Risk of Slipping!
The bath lift can slip if the suction cups do not
have a proper hold.
– Clean the bathtub and the suction cups with a
damp cloth before setting up the bath lift.
– Do not change the position of the bath lift in
the bathtub once it is set up.
1584939-B
Risk of Damage
– Ensure that the suction cups are mounted
properly.
– Ensure that the battery is charged.
– Fold the side flaps outwards before raising the
backrest.
– When lifting bath lift components, remember
to correctly assess the weights, refer to 10.1
Dimensions and weight, page 26.
– If a handrail is mounted at the inside of the
bathtub, use the side flap diverters (available
as an accessory).
WARNING!
Risk of Injury and Damage!
– Only set up the bath lift in bathtubs that
comply with the specifications of the following
table.
– Only use the bath lift in bathtubs with frontal
overflows.
Setup
11