Oscartielle DORADO 120 Mode D'emploi page 27

CS = Connecting cable display – electric card
D = Defrosting heater (Optional) / dripping heater for ice-cream finishing
Do = Optional dripping additional resistance (for ice-cream)
F1 = Solenoid refrigerant - condensing unit no. 1
F2 = Solenoid refrigerant - condensing unit no. 2
IG = Main switch
IL = Light switch
K1 = Relay for condensing unit no. 1
K2 = Relay for condensing unit no. 2
K3 = Relay for defrost control
LR = Intermediate shelf lights
Lv = Display case lights
M = Motor
M1 = Compressor for condensing unit no. 1
M2 = Compressor for condensing unit no. 2
MPR = Small reactor panel
P1 = pressure switch no. 1
P2 = pressure switch no. 2
PC = Control panel
PR = Reactor panel
QE = Electric panel
RE = Reactor
Rg = fan speed regulator. Factory settlement of fan regulators = 8,5
RL = side glass heating
Rv = front glass heating
SC = Electric card
SS = Defrost probe
ST = Temperature probe
TR = transformer
Vm = Fan motor
Vv = Display case fan
21 - Instructions for the defrosts synchronization of multiplexed cabinets with instrument EVZ000
Please refer to the explanation at page 10. The connecting cable is supplied in the multiplexing kit.
22 - Conformity Declaration
A copy of the declaration of product conformity can be requested by filling in the form available a the internet address:
http://www.oscartielle.it/conformity
25