Important Controller Codes - Lenze E82MV Série Instructions De Montage

6.6

Important controller codes

)
Note!
ƒ
ƒ
How to read the code table
Column Abbreviation
Code Cxxxx
1
2
*
v
s
(A)
uSEr
Designation
Lenze
à
Selection 1
IMPORTANT −
EDK82MV752 DE/EN/FR 7.2
The following table describes in detail the codes mentioned in the examples
for commissioning!
Do not change codes, the meaning of which is unknown to you! All codes
are described in detail in the System Manual.
Meaning
Code Cxxxx
Subcode 1 of Cxxxx
Subcode 2 of Cxxxx
Parameter value of the code is the same for all parameter sets and can be
changed in parameter set 1
Keypad E82ZBC
Keypad XT EMZ9371BC
Keypad E82ZBC
Keypad XT EMZ9371BC
Code, subcode or selection only available for operation with application I/O
Code is contained in the Lenze setting in the USER menu
Name of the code
Lenze setting (value at delivery or after restoring the delivery status with C0002)
Further information can be obtained from the "IMPORTANT" column
{%} 99 Min. value
Brief, important explanations
l
Commissioning
Important controller codes
l
The parameter value of the code can be defined
differently within each parameter set
l
The parameter value is accepted immediately
(ONLINE)
Changed parameter of the code or subcode will be
accepted after pressing v
Changed parameter of the code or subcode will be
accepted after pressing T V
Changed parameter of the code or subcode will be
accepted after pressing v if the controller is
inhibited
Changed parameter of the code or subcode will be
accepted after pressing T V if the controller is
inhibited
{unit} max. value
6
105