Safety Instructions; General Safety Information - Lenze E82MV Série Instructions De Montage

2

Safety instructions

General safety information

2 Safety instructions
2.1 General safety information
Scope
The following general safety instructions apply to all Lenze drive and automation
components.
The product−specific safety and application notes given in this documentation must be
observed!
Notes regarding the use of the controllers in UL−approved systems can be found in the
separately enclosed documentation.
For your own safety
}
Danger!
Disregarding the following basic safety measures may lead to severe personal
injury and damage to material assets!
Lenze drive and automation components ...
ƒ
... must only be used for the intended purpose.
... must never be operated if damaged.
... must never be subjected to technical modifications.
... must never be operated unless completely assembled.
... must never be operated without the covers/guards.
... can − depending on their degree of protection − have live, movable or rotating parts
during or after operation. Surfaces can be hot.
All specifications of the corresponding enclosed documentation must be observed.
ƒ
This is vital for safe and trouble−free operation and for achieving the specified product
features.
The procedural notes and circuit details provided in this document are proposals which
the user must check for suitability for his application. The manufacturer does not
accept any liability for the suitability of the specified procedures and circuit proposals.
Only qualified skilled personnel are permitted to work with or on Lenze drive and
ƒ
automation components.
According to IEC 60364 or CENELEC HD 384, these are persons ...
... who are familiar with the installation, assembly, commissioning and operation of
the product,
... possess the appropriate qualifications for their work,
... and are acquainted with and can apply all the accident prevent regulations, directives
and laws applicable at the place of use.
68
l
EDK82MV752 DE/EN/FR 7.2