tormatic T100 R Notice De Montage Et D'utilisation page 35

12 Declaration of Conformity
Manufacturer's Declaration of Conformity (Translation of the
Original)
In accordance with the EC Machinery Directive 2006/42/EC,
Annex II, Part 1, Section A.
We, Novoferm tormatic GmbH, declare under our sole responsib-
ility that the product described below complies with all relevant
regulations of the EC Machinery Directive in the version
2006/42/EC.
The EC type-examination procedure described in Annex IX was
performed by an approved testing laboratory.
Notified body:
Identification number:
EC type-examination
certificate:
Product model / product:
Product type:
Year of manufacture from:
Suitable for door drives:
Relevant EU directives:
• 2014/30/EU
• 2011/65/EU RoHS Directive including Annex II according to
(EU) 2015/863
Applied harmonised standards:
• EN ISO 12100:2010
• EN 12978:2003+A1:2009
• EN 13241:2003+A2:2016
• EN ISO 13849-1:2015, PL "C" Cat. 2
• EN 60335-1:2012
• EN 60335-1:2012/AC:2014
• EN 60335-1:2012/A11:2014
• EN 60335-1:2012/A13:2017
• EN 60335-1:2012/A15:2021
• EN 61000-6-3:2007/A1:2011
• EN 61000-6-2:2005/AC:2005
Other applied technical standards and specifications:
• EN 12453:2017
• EN 300220-1:2017-05
• EN 300220-2:2017-05
• EN 301489-1:2017
Manufacturer and name of the authorised representative of
the technical documentation:
Novoferm tormatic GmbH
Eisenhüttenweg 6
44145 Dortmund
Place and date of issue:
Dortmund, 20.06.2023
Dr. René Schmitz, Managing Director
Declaration of Conformity according to Directive
2014/53/EU
The optional radio system complies with directive 2014/53/EU.
The full text of the declaration of conformity can be found at:
https://www.tormatic.de/dokumentation/
TÜV NORD CERT GmbH
Am TÜV 1
45307 Essen
Germany
0044
44 780 13108301
T100 R
Door control
09/2023
NovoShaft 9.15 / 9.20 / 9.24 /
14.15 / SI8.120 / SI20.90 /
SI35.60 / SI4.5.90
13 Inspection
When being commissioned, power-operated doors must be in-
spected and maintained by correspondingly qualified persons
(persons with suitable qualifications, based on knowledge and ex-
perience) and in compliance with intervals specified by the manu-
facturer in the maintenance instructions and, if necessary, also in
accordance with any special national regulations (e.g. ASR A1.7
"Technical Rules for Workplace Safety - doors and gates"). All
maintenance and inspection tasks must be documented in the in-
spection logbook provided. It must be kept safe by the operating
company, together with the documentation of the door system,
throughout the entire service life and must be handed over to the
operating company in a duly completed fashion, at the latest on
the date of commissioning by the technician (we also recommend
this for manually operated doors). The specifications laid down in
the documentation of the door system (assembly, operating and
maintenance instructions, etc.) must be absolutely observed in
any case.
The manufacturer's warranty expires immediately if the inspec-
tion / maintenance has not been carried out properly!
Any changes that are made to the door system (if permitted at all)
must also be documented.
T100 R EN - 33