Installation, Operating and
Maintenance Instructions
Lock case information
Rear backset:
key operated lock boxes
H = 18 mm
The rebate clearance limiter
is important for the correct airgap
and thus the function of the
daytime latch → do not remove!
A
Distance
D
Backset
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
panicLock AP4
have cam position max. 45° left /
right hand in key removal position.
4-o'clock- position to the hinge
side in key removal position.
G
Handle position
H
Rear backset
45
5062179
Caution!
Requirement
for profile
cylinder:
Cylinder with
not adjustable
cam have to
Requirement
for profile
cylinder with
adjustable
cam:
Cylinder have
to have cam
position max.
45° or
L
Length T (STV)
**
croppable
EN
3