Publicité
Les langues disponibles
Les langues disponibles
PROBLEM
Chain saw stops
unexpectedly
during operation.
Motor runs, but
chain does not
rotate.
Chain brake does
not engage.
44
CORDLESS 12" COMPACT CHAIN SAW — CS1200/CS1200-FC
CAUSE
◾
The chain saw is overloaded.
◾
The battery pack or chain
saw is too hot.
◾
Saw chain is bound in the
wood.
◾
Chain does not engage drive
sprocket.
◾
Debris preventing full
movement of the chain-
kickback brake paddle.
◾
Possible chain brake
malfunction.
SOLUTION
◾
Decrease the load.
◾
Allow the battery pack or chain saw
to cool until the temperature drops
to the recommended operating
temperature range.
◾
Release the trigger switch; remove
the saw chain and guide bar from
the wood, then restart the chain
saw.
◾
Remove the battery pack and
reinstall the chain, making sure that
the drive links on the chain are fully
seated on the sprocket.
◾
Clean debris from external chain
brake mechanism.
◾
Stop using the chain saw
immediately! Contact EGO Customer
Service for repair.
Publicité
