Publicité
Les langues disponibles
Les langues disponibles
Low Kickback Saw Chain
The ramp-shaped depth gauges ahead of each cutter can minimize the force of a
kickback reaction by preventing the cutters from digging in too deeply at the kickback
zone. Only use a replacement chain that is equivalent to the original chain or has been
certified as a low kickback chain per ANSI B175.1. A low kickback tooth saw chain
is a chain that has met the kickback
2
performance requirements of ANSI B175.1
(American National Standard for Power
Tools - Gasoline-Powered Chain Saws
- Safety Requirements) when tested on
the representative sample of chain saws
below 3.8 c.i.d. specified in ANSI B175.1.
Cutter type
Bumper drive link
The bumper drive link (Fig. 2) also helps
deliver low-kickback performance.
CAUTION:
As saw chains are sharpened during their useful life, they lose some
of the low kickback qualities and extra caution should be used.
GUIDE BAR
This saw comes equipped with a guide bar that has a small radius nose. Small radius
noses generally have less potential for kickback. When replacing the guide bar, be sure
to order the bar listed in this manual.
13
CORDLESS 12" COMPACT CHAIN SAW — CS1200/CS1200-FC
Publicité
