Publicité
Les langues disponibles
Les langues disponibles
1. Hold the battery pack in the palm of
your hand.
2. Press the battery-release button
with your thumb; the battery pack
will disengage from the latch.
3. Grasp the battery pack and remove
it from the chain saw.
WARNING:
personal injury, always remove the battery
pack and keep hands clear of the locking tongue and trigger switch when carrying or
transporting the machine.
STARTING/STOPPING THE CHAIN SAW
Before Starting the Chain Saw:
1. Remove the battery pack.
2. Make sure that the chain is properly mounted and correctly tensioned according
to the chapter "ADJUSTING THE CHAIN TENSION" later in this manual.
3. Check the tension of the side-cover knob before use. If it is loose, securely
tighten the side-cover knob.
4. Check the oil level and fill the tank as needed. Make sure the chain is well
lubricated.
5. Check the sharpness of the cutting teeth of the saw chain.
6. Make sure that the chain-kickback brake paddle can move back and forth easily
between the brake position and the operating position.
7. Hold the chain saw with both hands: with the right hand on the rear handle and
the left hand on the front handle.
8. Make sure that you have a secure and balanced footing. Watch out for obstacles
such as tree stumps, roots, and ditches, which could cause you to trip or
stumble.
9. Stand upright and hold the chain saw in a relaxed position and make sure the
saw chain is not touching the ground or any other objects.
26
CORDLESS 12" COMPACT CHAIN SAW — CS1200/CS1200-FC
To avoid serious
11
Battery-release
Button
1
2
Publicité
