Publicité
Les langues disponibles
Les langues disponibles
USING THE LANYARD EYELET (Fig. 9)
WARNING:
when hanging the chain saw on a tool belt. Saw chain is sharp and may cause
serious injuries.
WARNING:
combined weight of the chain saw and the battery pack. Serious injuries and
property damage could result if the chain saw falls.
INSTALLING/REMOVING THE BATTERY PACK
NOTE: Fully charge your battery pack before first use.
To install battery pack (Fig. 10)
1. Align the ribs of the battery pack
with the mounting slots in the chain
saw's battery port.
2. Slide the battery pack into the
machine until it snaps into position.
WARNING:
latch on the chain saw snaps in place
and the battery pack is secured to the
saw before beginning the operation. Failure to securely seat the battery pack could
cause the battery pack to fall out, resulting in serious personal injury.
WARNING:
battery pack BA1400/BA1400-FC/BA1400T/BA1400T-FC. Larger battery packs will tip
the rear of the saw down.
To remove battery pack (Fig. 11)
WARNING:
pets around you when pressing the battery release button. Serious injury could
result if the battery pack falls. NEVER remove the battery pack at a high location.
CORDLESS 12" COMPACT CHAIN SAW — CS1200/CS1200-FC
Always cover the saw chain and guide bar with chain sheath
Make sure the lanyard is sufficiently strong to support the
Make sure that the
To keep comfortable balance during cutting, please use only with the
Always be aware of the location of your feet and children or
10
25
Publicité
