Marshall CODE 50 Manuel D'utilisation page 5

AMPLIFIER HISTORY (CONT.)
JVM410H™
When the JVM410H launched in 2006 it caused quite a stir. This 100 Watt head is an all-
valve tonal monster that has four channels, each with three modes: Green, Orange and
Red, offering guitarists a range of 12 unique tones. Each mode reconfigures the channel
gain stages in order to develop different amounts of gain and tone. The JVM410H's vast
tonal spectrum makes it the most versatile amplifier Marshall has ever made, used by many
professional players.
POWER AMPLIFIERS
MST modelling recreates four classic and vintage valve power output topologies. A valve
power stage is a vital part of an all-valve amplifier's sound and its tonal character.
SPEAKER CABINETS
Marshall speaker cabinets are perhaps as famous as Marshall amplifiers. The iconic 4 x 12"
design has changed little since Jim Marshall designed the first one in 1965. Since then the
Marshall 4 x 12" has become the touchstone for all other speaker cabinets. MST modelling
recreates the sonic characteristics of eight classic Marshall speaker cabinets, including a
variety of 4 x 12", 2 x 12" & 1 x 12" speaker configurations. Marshall speaker cabinets differ
not only in their speaker configurations, but in the speakers that they use, how they are
wired and the size of the cabinet.
GETTING STARTED
To begin using CODE:
• Ensure that the power ON/OFF switch is set to the OFF position (#14 in this manual).
• Connect the supplied power cord to the rear power socket of the amplifier before
plugging into the mains electricity supply.
• Plug your guitar cable into the amplifier INPUT jack socket (#2 in this manual).
• Set the MASTER volume control to zero (#8 in this manual).
• Turn the amplifier ON using the ON/OFF switch.
• Gradually turn the MASTER up to your desired volume level.
• Turn the PRESET selector to explore your CODE amplifier's factory Presets
(#9 in this manual).
ENGLISH